According to many years of experience in structured cabling and troubleshooting, summarizes some matters need to pay attention to when wiring, we need to pay attention to these when wiring, which ensures that we enjoy network more smoothly.

Miscellaneous wiring note 1: hardware.

Compatible in network equipment choice, try to make all the network devices using a company's products, so that we can minimize the high-end and low-end or even the same level incompatibilities between different devices. And don't choose a network base material that doesn't have quality assurance to save dozens of dollars, such as jumpers, panels, wires, etc. These things can be placed in the ceiling or wall, which can be difficult to solve after problems. At the same time, even large brand products should be tested with professional tools before installation.

Integrated wiring note 2: connection line.

When we finish the structured wiring work, we should remove the redundant wires and equipment and prevent the ordinary users from picking up the wires. In addition, in some cases, users will use a second - and second-line devices to create a broadcast storm in the network, so it is necessary to follow a strict management system. Don't leave any parts after wiring, because users typically not familiar to the network, there is a problem when grasping, likely see redundant equipment will use casually, making the problem worse.

Comprehensive wiring notice three: antimagnetic.

Why can electromagnetic devices interfere with network transmission speed? Because of electrical signals in the network, and near the high-power electrical appliances will produce magnetic field, the magnetic field and will work on nearby cables, generate new electric field, the signal is weakened or lost would happen naturally. Need to pay attention to is to prevent interference, except to avoid interference sources of cable joint connection is crucial, whether the 568 a or 568 b standard to make the network cable, make sure 1 and 2, 3 and 6 are two pairs of conductor, such ability strong anti-interference ability. In structured wiring, it is necessary to design the network line in advance, away from the large radiation equipment and large interference sources.

Comprehensive wiring precautions 4: heat dissipation.

In a high temperature environment, the equipment always breaks down frequently. Why is that? Used computer the reader knows, when the CPU fan cooling poor often freezes or automatic restart computer system, network equipment, high-speed operation of the CPU with the need of the core components in a suitable work environment, the temperature is too high will make them damage. Equipment heat dissipation work is must do, especially for core device and the server, the need to place them in a dedicated computer room management, and also need to be equipped with air conditioning and other cooling equipment.

Comprehensive wiring notice 5: connect cables according to specifications.

It is well known that there are many kinds of cables, such as cross lines, straight lines, etc. Different cables have different USES in different situations. If you confuse the type, you will have a network failure. Therefore, in structured cabling, special attention must be paid to the type of cable. If the cable is not in accordance with the requirements, there will be network problems. Wiring experience: although many network devices currently support the DIP jumper function, it can be used normally whether you are connected to a positive or a negative line. But sometimes the device doesn't have the DIP function, and only if you pay special attention to the wiring type, you can avoid unnecessary trouble.

Note 6 for integrated wiring: stay in the network access point.

Indeed, most of the time in the process of structured cabling did not consider the scalability of the future, the network interface quantity is limited, just enough for immediate use, if later to residential layout change, will appear these problems. Therefore, it is necessary to set aside twice as many network access points in structured cabling. As is known to all, the Internet is developing very fast. It was working for 10Mbps to the desktop a few years ago. Now it is 100Mbps, even 1000Mbps to the desktop. Network scalability is need our attention, who all don't want to use only 2 ~ 3 years to the wiring system renovation, expansion, so the redundant layers of access point is very important, so as to meet the needs of future upgrade.

As is known to all, the Internet is developing very fast. It was working for 10Mbps to the desktop a few years ago. Now it is 100Mbps, even 1000Mbps to the desktop. Network scalability is need our attention, who all don't want to use only 2 ~ 3 years to the wiring system renovation, expansion, so the redundant layers of access point is very important, so as to meet the needs of future upgrade.