Yuntai the bolt can say is the most common equipment in video monitor system, their traditional bolt, yuntai shooting much control the function of the mobile shooting area, make its applicable scope is larger, meet demand more. However, if the equipment maintenance is not in place after the long-term use of the cloud camera, there will often be a common failure of the cloud platform, such as the unmoving or unable to turn at all. The main causes are as follows:

(1) the outdoor cloud platform is damaged or even damaged due to high ambient temperature, too low, waterproof, and anti-freezing measures.

(2) the total weight of the camera and its protective cover is higher than that of the cloud platform. In particular, the outdoor use of the cloud platform, often the protection cover of the weight too large, often appears in the cloud platform to move (especially the vertical direction of the movement).

(3) the camera is only allowed to be installed in the cloud platform, and the hoisting method is adopted in the use. In this case, we suggest that the hoisting mode will cause the operation load of the cloud platform to increase, so the use of it will soon lead to the failure of the transmission mechanism of the cloud platform and even burn the motor.

(4) when the distance is too far, the operating keyboard can't control the camera (including the lens) and the cloud platform through the decoder. This is mainly because when the distance is too far, the control signal attenuation is too large, and the control signal received by the decoder is too weak. The relay box should be installed at a certain distance to amplify the plastic control signal.

In fact, for many users of video monitoring, the maintenance and implementation of the equipment is cumbersome and time-consuming, which often seems to be unnecessary. When the whole equipment fails, it costs more to repair. This is also the main problem that civil security has been difficult to popularize widely.